94 to 98 Mustang Airbag Diagnostic Code Clear Location

(Last Updated On: January 7, 2018)

94 to 98 Mustang Airbag Diagnostic Code Clear Location

Airbag Diagnostic Code Clear Location

Airbag Diagnostic Code Clear Location

This diagram is for a 1994, 1995, 1996, 1997, and 1998 Ford Mustang.

Here it is, the Mustang Service Manual makes it look as if it’s in the glove box, which we all know that it’s not. Look directly under the glove box and you will see a large wiring harness that goes to the computer. The plug – gray with one black wire and a brown/blue wire was taped to that harness (at least in my case). If it were a snake it would have bit me. You can only clear the codes after the problem is fixed (i.e. 52,53, 64 etc.). Cycle the key to on engine off and airbag light to flash the code at least one time but before the light stays on. Once it flashes the code once, connect a jumper wire to the two prongs. After about 5 seconds the diagnostic module will beat 5 times. Remove the jumper cables and wait to see if there are other codes. If so just repeat the steps. That’s it. Easy as pie. I cleared mine. Peace

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.